How To String A Weed Eater – The Simple Way Removing String From Weed Eater Head It might be aggravating when your weed eater ceases to function correctly. One of the most frequent issues is that the line becomes exhausted. When this occurs, you will need to add extra line to the cutter head of your weed eater. 
Remove the old line from the string trimmer. Cut a fresh 15- to 25-foot-long section of line. halve fresh trimmer line. Insert the end of trimmer line half 1 into hole 1 on the spool. Wind half of one trimmer line around the spool in accordance with the arrow. 
Removing Old Trimmer Line From Weed Eater Head Remove the old trimmer line by removing the trimmer head’s cover. Once the cap has been removed, the remaining string should be unwound by tugging it in the direction of the arrow.
What length of string does the Milwaukee Weed Eater utilize?
Additional Field Notes – Aside from the simple loading, the Milwaukee Easy Load String Trimmer Head stands out for a handful of features. First, this build is taller than the standard head on. The additional mass alters where the head meets the ground, but the line remains nearly the same height.
- It is easy to become accustomed to.
- When you are almost out of line and the final portion of the line extends out, it will be expelled from the head.
- Despite the fact that this leaves you with a 15-inch or longer stretch of line in the yard, this is actually a good thing.
- It means that you do not need to open the head at all; simply feed the fresh length of line in and continue working.
Changing the heads is straightforward. Utilize the included rod to prevent the head from rotating. Unscrew the old head and replace it with the Milwaukee Easy Load String Trimmer Head. It takes longer to open the packaging than to replace the heads. The head is compatible with 0.080″ and 0.095″ line.
Is the string trimmer from Milwaukee bump feed?
Compatible with the Milwaukee® M18 FUELTM String Trimmer (2725-20), this head can clear up to 16 feet in a single pass. The head employs a bump feed system and has exceptional wear resistance, resulting in a longer lifespan.
How long should the string on a weed wacker be?
To change the string, remove the spool from the head of the trimmer. Then, cut a new piece of thread approximately 8 feet in length.
The benefits of bump feed – When using a string trimmer with bump feed, the string is advanced manually by lightly tapping the ground. This allows you to adjust the amount of line used. The bump feed is also a more straightforward technique for string advancement, thus it is more probable that you can make repairs fast if it malfunctions.